East-coast-supercharging ECS Paxton SC1500 2010+ Camaro Supercharger Kit Manuel d'utilisateur télécharger pdf (Page 16)

52) Remove coolant line from factory oil cooler. This

line will be replaced with re installation of upper

radiator hose.

53) From top of car, place AC Condenser back in

factory location to gain access to engine bay and

plug in pressure sensor

54) Using a clean container, remove power

steering reservoir drain line and drain PS fluid.

Replace PS drain Line with 31 inches of

supplied 3/8ths in ps hose directly to PS cooler

in condenser securing with supplied hose

clamps. Remove remainder of line, and

replace with provided hose and hose clamps

at PS reservoir and condenser.

55) At the opposite end of the PS cooler

(passenger side of car), remove the hard

factory PS line, and splice provided 3/8 hose

with provided barbed fitting and hose

clamps. Refill PS reservoir now. Re attach

clamps holding lines to front cross member.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 24 25

Pas de commentaire

East-coast-supercharging ECS Paxton SC1500 2010+ Camaro Supercharger Kit Manuel d'utilisateur Page 16