East-coast-supercharging ECS Half Shaft Loops Manuel d'utilisateur télécharger pdf (Page 3)

10. Make sure the bracket is centered

on the CV shaft and tighten both of

the 7/16 bolts.

11. Slide the U bend over the CV

shaft and insert the 7/16 x 3 ¾ bolt

with supplied flat washers and lock-

nuts into the main bracket. (Fig 5)

12. Tighten the U bend bolt.

13 . Retighten the leaf spring bolts

by turning the bolt the same

number of turns that were loos-

ened in step 4.

Thank you purchasing the ECS Halfshaft Loop Kit.

Any questions feel free to call the shop at

609-752-0321.

Fig 4

Fig 5

1 2 3

Pas de commentaire

East-coast-supercharging ECS Half Shaft Loops Manuel d'utilisateur Page 3